Eurocom B7110 FOX - Manual (Page 181)

Video Driver Controls
Attaching Other Displays B - 9
B
Attaching Other Displays
If you prefer to use a monitor or flat panel display, connect it to the external monitor
port or HDMI-Out port on the left of the computer.
To Clone Displays:
1. Attach your display to the external monitor port or HDMI-Out port, and turn it on.
2. Go to the Intel(R) G&M control panel and click Display > Multiple Displays.
3. Click Operating Mode and select Clone Displays from the menu.
4. Click Apply, and OK to confirm the settings change.
5. You can switch the Primary/Secondary Display from the menu.

Multiple Display
At least one other dis-
play must be attached in
order to view Multiple
Display selection op-
tions.
General Settings
Click General Settings
to access settings the
options for any attached
display.
Figure B - 3
Display > Multiple
Displays (Clone)