Eurocom M7X1CUH LYNX - Manual (Page 184)

ATI Video Driver Controls
B - 4 Attaching Other Displays
B
Attaching Other Displays
Configuring an External Display in Windows Vista
1. Attach your external display to the external monitor port/HDMI-Out port and turn it on.
2. If a New Display Detected window does not appear in Windows Vista, go to the
Windows Mobility Center control panel (Mobile PC > Adjust commonly used
mobility settings) and click Connect display.
3. Click on any of the buttons to configure the displays to your preferences, or click
Display Settings (in the New Display Detected window) to access the control
panel.

Display Devices
Besides the built-in
LCD, you can also use
an external monitor/flat
panel display as your
display device. The fol-
lowing are the display
options:
• The built-in LCD.
• An external monitor
connected to the
external monitor port.
• A flat panel display
connected to the
external monitor port.
Figure B - 3
New Display
Detected

Switching Displays Using Fn + F7
If your external display is connected to the HDMI port, and you are using the Fn + F7 Hot Key combi-
nation to switch displays; note that the audio will not automatically switch back to/from the HDMI con-
nection and will need to be manually switched. See
“HDMI Audio Configuration” on page B -
6 for details.