EXFO ARU-100 HPNA Test Software Option for DSL/IP Tests - Manual

P/N: 1055095 April 2009 1/3
A
DDENDUM
This information applies only to the
AXS-200/620/625/630/635/650 Triple-Play Test Sets
user guides.
HPNA Tests Software Option for DSL/IP Tests
With the introduction of the ARU-100 HPNA Test Probe, a new test software
option is available for any AXS-600 series module (except the AXS-200/610)
providing HPNA to Ethernet network tests, performance measurement
tools and results. The HPNA tests software option enables your AXS-600
series module to interface with the ARU-100 to validate triple-play services
by leveraging existing coax cable in the home network environment.
Note: The following additional parameter options can be found in the
Connection Setup function for DSL/IP tests.
Selected Profile
The Selected Profile tab allows you to configure and store multiple profiles
containing specific setups for the unit. The default settings for current
profile are: Profile Name is Default; LineMode is Ethernet; and
AccessMode is Bridged.
³
Profile Name is a list of all
available profile files in the current
directory with the first entry being
Default. Once you open the
selected profile, it remains active
in the unit until a different or
newer profile is selected. You can
store over 100 profiles.
³ Line Mode is Ethernet, ADSL2+,
VDSL2, or HPNA-coax. If you select the HPNA-coax Line Mode, verify
that the ARU-100 HPNA test probe is connected to the WAN port of your
AXS-600 series module.
³
AccessMode displays a list of values dependent on the Line Mode
selection.