EXFO EPM-ELS-50 - Manual (Page 8)

Safety Information 4
2 Safety Information
Your instrument is a Class 1 laser product in compliance with standards IEC 60825-1
and 21 CFR 1040.10. Laser radiation may be encountered at the output port.
The following label indicates that a product contains a Class 1 source:
Note: The label is affixed to your product.
W
ARNING
Do not install or terminate fibers while a laser source is active. Never
look directly into a live fiber and ensure that your eyes are protected
at all times.
W
ARNING
Use of controls, adjustments and procedures for operation and
maintenance other than those specified herein may result in
hazardous radiation exposure.
CLASS 1
LASER PRODUCT