EXFO FIP-400B Fiber Inspection Probe and ConnectorMax2 User Manual
Page 86
Inspecting Fiber Ends
80
FIP-400B
Updating the Firmware and Software
4. The wizard may display a warning message indicating that the
hardware has not passed Windows Logo testing. In this case, since it
has been verified that the drivers work with Windows, click Continue
Anyway.
5. Follow the on-screen instructions, and then click Finish when the
installation is complete.
6. When the application displays an error message indicating that the FIP
firmware update has failed, click OK to close the message.
The automatic upgrade process will continue normally since the driver
has been associated with your fiber inspection probe already.
Note: If the application continues to display the firmware update error message
even after the driver has been associated correctly with your fiber
inspection probe, contact technical support.