Setting test parameters – EXFO FTB-635 Wideband Copper and DSL Test Module User Manual
Page 182
Advertising
Multimeter 2 Tests
174
FTB-635
Isolation Test
The page allows you to set the following parameters:
Threshold is the threshold limit for each pair: Maximum, Minimum, or
None.
Threshold Resistance sets the threshold value.
Setting Test Parameters
The Test Parameters page allows you to set the Multimeter 2 Isolation
test parameters.
To set the Parameter values:
1. From the Copper main menu Test Groups, select Multimeter 2 test
.
2. From the Tests menu, select Isolation test.
3. Tap Snapshot or Continuous tab for which you want to set the
Parameter values.
4. Tap Edit Parameters button to open the Test Parameters page.
5. Set the Parameter values as required.
6. Tap Close to confirm and exit the page.
Advertising