EXFO FTB-700 for FTB-1 - Manual (Page 34)

Preparing Your OTDR for a Test
26 FTB-700 Series
Naming Trace Files Automatically
4. Fill out the required information in the corresponding boxes and select
the direction for your trace files.
5. Press the button appearing next to the Fiber ID box to change the
contents of the fiber identification.
6. Change the criteria as needed, then press OK to confirm your new
settings and return to the Default Trace Information window.
Number of digits
composing the
variable part
Value at which the
autonumbering
sequence starts
The variable part will
increase or decrease
depending on your
choice