EXFO FTB-8100 Series Transport Blazer for FTB-200 - Manual (Page 126)

Port Tabs
114 FTB-8100 Series Transport Blazer
Port TX (Electrical Interfaces)
Port TX (Electrical Interfaces)
Press Main Menu, Test, Port, and Port TX.
Configuration
³
Connector: Indicates the physical port used for the test. For electrical
port, possible connectors are: Bantam (port labelled 1.5M/2M) or BNC
(port labelled 2M/8M/34M/45M/52M/140M/155M).
³
Interface: Indicates the interface used for the test. Possible interfaces
are: DS1 or E1 for the Bantam and RJ-48C connectors, and STS-3e,
STS-1e, STM-1e, STM-0e, DS3, E4, E3, E2, or E1 for BNC connector.