EXFO MaxTester MAX-630 - Manual (Page 31)

Setting Up the MAX-630
VDSL2/ADSL2+ Multi-play Test Set 25
Upload Setup
FTP Setup
The FTP Setup function allows you to configure the
file transfer information using the following
parameters:

Address Format allows you to select the FTP
server address type:

IP Address

URL

FTP Server Address allows you to set either the
IP Address or URL.

Port is a fixed numeric value for the signalling port
used to establish an IP network session.

Username/Password is your login ID and password.

Mode is either Active or Passive for the file transfer mode.

Transfer Type is set to Binary, transferring files as a binary stream of
data.

Remote Directory can be used to specify the file upload directory on
the FTP server, for example, dir1/dir2. If this field is left empty, the FTP
upload will save the result file at root directory on FTP server.

Restore Default button allows you to reset the entries to the default
settings.