Installing fc connectors, Aution – EXFO FG-750 User Manual
Page 49
Getting Started with Your Fiber Guardian
Fiber Guardian
35
Installing FC Connectors
Installing FC Connectors
The 1x4 and 1x1 switch cassettes and FG750-ST model are equipped with
SC connectors by default. However, if you prefer, you can purchase FC
connectors as an accessory to replace the SC connectors.
To install FC connectors on switch cassettes:
1. Use a small Phillips screwdriver to remove the two screws on the SC
connector and expose the connector baseplate and ferrule.
2. Clean the new FC connector (see Cleaning Switchable Connectors on
3. Fix the FC connector onto the connector baseplate with the two
screws.
When you have finished installing the connectors and have reconnected
the optical fibers, you can resume all optical route testing.
C
AUTION
To avoid damaging your unit, do not attempt to replace the
connectors on built-in switches.