Arning – EXFO IQS-12004B DWDM Passive Component Test System for IQS-500 User Manual
Page 97
Advertising
Calibrating the DWDM Passive Component Test System
DWDM Passive Component Test System
85
Performing Reference Measurements
3. Connect the launch fiber, as indicated on the screen.
4. Mandrel the launch fiber (i.e., wrap the fiber a minimum of five turns
around the mandrel tool).
5. Click OK to start the operation.
W
ARNING
Never look directly into a live fiber and ensure that your eyes are
protected at all times.
Advertising