GlowShift Diesel Set- 60 PSI Boost, Pyrometer EGT, 100 PSI Fuel Pressure User Manual
Page 4
Additional Installation Information & Material Requirements
GlowShift Gauges Approved Conductor Wires: Successfully installing GlowShift Gauges may require lengths of wire
(sizes and quantity depend on vehicle, gauge type, gauge location and / or sensor location). For correct and proper
GlowShift Gauge installation and operation, the use of 18 Gauge (wire diameter) automotive grade conductor wire with
sheathing is recommended for one or more gauges per vehicle. When installing and routing wires from the engine
compartment, to inside the vehicle cabin, always employ the use of a rubber grommet. This will prevent and deter the
stripping of power supply and / or sensor wires that is necessary to deliver vital statistics about your engine to your
GlowShift engine monitoring instruments. Never use wire nuts to fasten or bound vehicle / gauge or sensor wiring. Always
use securing crimp connectors or solder individual wire junctions together for optimum gauge installation and operation.
GlowShift Gauges Approved Installation Accessories: GlowShift Gauges may require the installer or user to provide
additional products, accessories or adapters for the correct installation and operation of a gauge or sensor, as per the
GlowShift Installation Instructions. When installing and routing hoses to or from the engine compartment, to inside the
vehicle cabin, always employ the use of a rubber grommet. This will prevent and deter the stretching or pinching of hoses
that is necessary to deliver vital statistics about your engine to your GlowShift engine monitoring instruments.
GlowShift Gauges Installation Instructions: Installation documents are solely to provide a guide for individuals that are
mechanically and electronically able to install products. If you are unsure about the correct procedure of installation for a
product or device, you should consult a licensed professional.
ONE YEAR NON-TRANSFERRABLE LIMITED WARRANTY AND DISCLAIMER
GlowShift Gauges, LLC ("GlowShift") warrants to the original retail consumer purchaser, and not any other purchaser or
subsequent owner, that this Product will be free from defects in material or workmanship for a period of one (1) year from the
purchase date.
For a period of one (1) year from the date of purchase, at no charge to the Purchaser, GlowShift will repair or replace this
Product if it is determined by GlowShift to be defective. After the warranty period, the Purchaser must pay all charges for parts
and labor.
Coverage under this warranty is only valid within the United States, including its territories, as well as in certain other countries.
Purchasers should check our web
to determine the warranty coverage in the countries in which they
are located.
GlowShift does not warrant the installation of the Product, which is the sole responsibility of the Purchaser. Installation should
be done by licensed professionals. Improper installation may cause damage to the Product and any vehicle in which it is
installed, and may cause burns and electrical injury to individuals. GlowShift’s warranty does not cover any expenses incurred in
removing Products that are defective or re-installing replacement Products in their place.
During the warranty period, to have the Product repaired or replaced, the Purchaser must return the Product, freight prepaid by
the Purchaser, to GlowShift (but for customers in the contiguous United States, GlowShift will pay the shipping charges if any
Product fails during the first thirty (30) days after purchase). The Product must be returned in its original carton or in a similar
package affording an equal degree of protection. GlowShift will return the repaired or replaced Product, freight prepaid, to the
Purchaser. GlowShift does not provide Purchasers with temporary replacement units during the warranty period or at any other
time.
This limited warranty is non-transferrable and will automatically terminate if the original retail consumer purchaser resells the
Product or transfers the vehicle in which the Product is installed. An “original retail consumer purchaser” is a person who
originally purchases the Product, or a gift recipient of a new Product that is in its original packaging and unopened.
This limited warranty is subject to all of the following terms and conditions:
TERMS AND CONDITIONS
1. NOTIFICATION OF CLAIMS; WARRANTY SERVICE: If Purchaser believes that a Product is defective in material or
workmanship, written notice with an explanation of the claim shall be given promptly by Purchaser to GlowShift. All warranty
claims must be made within the warranty period, and any Products returned to GlowShift must be shipped in accordance with
GlowShift’s procedures (including use of RMA numbers supplied by GlowShift after notification). The repair or replacement of
any Product or part thereof shall not extend the original warranty period. The specific warranty on the repaired part only (not
including gauge sensors) shall be in effect for a period of ninety (90) days following the repair or replacement of that part, or the
remaining period of the Product warranty, whichever is greater. GlowShift does not provide a warranty on replacement gauge
sensors.