GoDEX GoLabel - Manual (Page 3)

GoLabel On-line Help
3 V1.002f
2. Working Environment
2.1 General
With the friendly design, user clicks the icon to open a new file for label design and editing. There are two
working pads on the screen. The left pad is for label design area, right side of pad is for command area. In label
design area, user can design, edit, delete and then save label as a file name with “ezpx” file type (GoLabel always
save the file name with file type “ezpx”). In command area, user can export the label on the left working pad to the
command area with the printer’s command format (on the right working pad).
2.2 Command Area
The labels exported to the Command Area in “TEXT/ASCII” format and can be editing and saving as a “TEXT/ASCII” file
on PC. Thus, in DOS mode, user may work on this file with DOS commands - COPY, PRINT, TYPE, etc. to manipulate
this TEXT/ASCII file and then send/print it to the printer directly. Besides, the commands in the Command Area are
exported direct from the Label Design Area. For certain high level application, GoLabel provides these quickly and
convenient of operation tools for SI engineer and software designer.