Grandview CB-MI(Cyber Intergrated Motorized) - Manual (Page 4)

3 8
Up groove
Down groove
Figure 8 Figure 9 Figure 10
Figure 11
Figure 6 Figure 7
Drop Limit
Retraction Limit
Figure 12
Wireless Synchro
Convertor Receiver
ntelligent Synchro Power
Supply Control Adapter.
Figure 27 Figure 28 Figure 29
二 ．External Wall Switch
Manual control for screen up/stop/down.
Figure 30 Figure 31
Figure 32
三．External Intelligent Wall Switch Connection
Locking screw Locking piece
3.Loosen the locking screw to lower the locking piece down all the way (figure 6-7)
4.When mounting the screen onto the floating mounting brackets, ensure the grooves on the screen
casing match up with the upper and lower groves on the brackets. Simply slide in, and bracket's grooves
will hold the casing in place. Horizontal adjustments can still be made (figure 8-10).
5.To lock the screen in place, close and tighten the locking screw on the mounting brackets. This will keep
the screen casing locked firmly in place (figure 11-12).
Other Control Options Description
1.FM to IR control description:
When you insert the Wireless Synchro Converter Receiver into the EXTR slot of the control panel, you can use a
FM wireless remote control device. (figure 27). The Intelligent Synchro Power Supply Control Adaptor (for all
projectors) combined with the wireless 12V trigger (for all projectors with a trigger output) can control the screen
together. (figure 28-29)
1.Control for screen up/stop/down when connected to the
control panel interface of the screen.
2.Control for screen up/stop/down when connected to the
computer's RS232 or USB ingerface.
Attention:
> Please make sure there is no dust or dirt on the fabric surface before rolling it back to the casing
> The recommened working time is less than 50 seconds. The motor will enter overheating protection
status and stop working for every continuous 4 minuters operation, user would need to wait for a
while until the motor cool down before operating again.
> There is no lube needed for the motor. Please be noticed that the appropriate setting is optimized
which requires no further adjustment, please consult the after sales team before adjusting the limits.