Gryphon Colosseum - Manual (Page 9)

Colosseum
User Guide & Introduction
Features:
*Fully balanced circuit
*2 x 160 Watts per channel Pure
Class A
*48 High current bipolar output tran-
sistors
*340,000
µF power capacitor bank
*Flat frequency response to beyond
350 kHz
*Zero negative feedback
*User-programmable Class A bias
*Class A green autobias **
*DC servo coupling
*Frequency-independent damping
factor
*Rigid mechanical structure
*Microprocessor controlled,
non-invasive “smart” protection sys-
tem
*Upgradeable software.
*Double sealed, mil spec PCB with
105
µm copper trace
*Integrated service log.
** with Gryphon Mirage or Sonata
range of Preamplifiers
‘
Specifications subject to change without notice:
Installation
Unpacking
Obviously, the purpose of packing
materials in the transportation of
heavy amplifiers is to protect the
product on its perilous journey from
manufacturer to proud owner.
Unfortunately, in our experience
this often results in sprained backs
and bleeding fingers at the moment
of truth: the uncrating of hefty
power amplifier.
The Colosseum will be delivered in
a dedicated flightcase. Keep this
case and foam for any future trans-
port. Do not try to lift the amplifier
alone. You Grypphon dealer will set
the amplifier up for you.
The following items are enclosed:
1 Colosseum
1 Pair of gloves
1 Acrylic polish
1 AC power cord
1 Warranty card
1 This manual
1 Green bias cable
1 Packing list
If anything is missing or damaged,
please contact your Gryphon dealer
immediately.