Gryphon Mirage - Manual (Page 12)

Menu-activated
functions
The Gryphon Mirage
incorporates several functions
which are accessed via a Menu
system.
To access the Menu, press
Menu. MENU will appear in the
display and the Mirage will mute
its output. CONTINUE will blink
in the display. To enter the Menu,
press Monitor. If you do not wish
to access the menu-controlled
functions, press an Input button
so that EXIT blinks in the display,
then press Monitor to return to
normal playback and to the nor-
mal display.
When you enter the Menu,
NAME INPUT will appear in the
display. Press Menu again to
move through the menu-con-
trolled functions in the following
order:
Name input - Change max level -
Change start level - Balance -
Input levekl match - Brightness
control - Restore settings -
Dedicate input 3 to AV - Green
bias set up - Continue/exit.
At the end, you can either con-
tinue from the beginning of the
list or exit the Menu. To return to
the top of the list, press Monitor
and NAME INPUT will appear in
the display. To exit the Menu,
press an Input button so that
EXIT blinks in the display, then
press Monitor to return to normal
playback and to the normal dis-
play. Any settings which you
have changed are automatically
stored in memory.
Naming Inputs
You can assign a specific name
to each input, either a pre-pro-
grammed standard name or a
custom name of your choice of
up to 8 characters. When NAME
INPUT appears in the display,
press Monitor. SELECT INPUT:
1 will appear in the display. To
choose a different input for nam-
ing, press an Input button to
move up or down through the
five inputs. When the number of
the input which you wish to
name is displayed, press
Monitor. CUSTOM will blink in
the display. If you wish to create
a custom name for the input,
press Monitor and skip to section
1.a. below. If you wish to select a
name from the standard list,
press an Input button so that
STANDARD blinks, then press
Monitor and skip to section 1.b.
below. Please note: If a name
has previously been assigned to
the input, that name will be delet-
ed if you press Monitor while
STANDARD is blinking.
12