Gryphon Legato Legacy - Manual (Page 11)

Unpacking
During unpacking and installa-
tion, please take care to avoid
scratching the Gryphon Legato.
Hard, sharp objects such as
tools should not be nearby dur-
ing this process. You might want
to remove your wristwatch, rings
or other jewellery before han-
dling the preamplifier. Please
keep the carton and all packing
materials in a dry place for safe
future transportation.
The following items are
enclosed:
(this list does not apply if the
Legato is factory fitted inside
Gryphon Sonata Allegro)
1 Gryphon Legato phono stage
1 Gryphon Legato power supply
(with stand alone version)
2 AC power cables
(with stand alone version with
powersupply )
2 DC power supply cables
(with stand alone version)
1 pair of Lemo connectors
( with all Legatoversions)
1 pair of white gloves
1 acrylic polish
1 packing list
1 purchase registration card
If anything is missing or dam-
aged, please contact your
Gryphon dealer immediately.
Installation
In order to minimize any possible
risk of electrical interference, do
not place the preamplifier direct-
ly above or below the power
supply. The length of the power
supply cables allows you to
place them some distance apart.
If you wish to place them side by
side, please place the power
supply to the left of the preampli-
fier as seen from the front.
Power supply
For each channel, connect a DC
connector cable to the socket
marked DC OUTPUT on the
supply and to the socket marked
DC INPUT on the preamplifier.
Turn the locking connector
clockwise to lock firmly to pre-
vent accidental disconnection.
Each channel has its own On/Off
switch located under the unit.
For optimum performance, we
recommend that you leave the
Legato powered up at all times.
If you choose to turn the Legato
on and off, please remember:
ALWAYS turn the Legato on,
BEFORE turning on the power
amplifier.
ALWAYS turn the power amplifi-
er off, BEFORE turning off the
Legato.
11