Gryphon Mojo User Manual
Page 12
Tweeter tuning
Sometimes, room acoustics
may require a slight adjust-
ment of HF levels to obtain
seamless presentation. WE
would not consider a potentio-
meter - ruining the fantastic
performance of the tweeter.
Instead, the Mojo is fitted
with a set of Duelund Graphite
resistors on the back of the
speaker, protected under a
steel bar. The extra resistors
are in the box with accessories.
The resistors are placed in the
clips and the leads connected
to the black terminals. Be
careful not to break the resis-
tors and make sure that the
leads are not short circui-
ted to the back plate or
the other resistor.
Default setting/neutral:
R1 = 10 Ohm
R2 = 22 Ohm
Low setting: (-0.5 dB)
R1 = 22 Ohm
R2 = 10 Ohm
High setting:
R1 = 5.6 Ohm
R2 = Empty
Tweak alert
Mojo is the fruit of an extre-
mely protracted, very open-
minded development process.
We assure you that it is not
possible to improve this sys-
tem by replacing a few
lengths of wire or a capacitor.
The Mojo stand
The Mojo stand assembly is
very easy. We recomend the
use of the enclosed spikes and
coasters to ensure optimal
coupling to the floor even on
carpets. The stand should be
assembled with the hole in the
column facing up. This
alows filling of sand to add
weight to the stand (IMPOR-
TANT).
The enclosed silicone micro
feet should be attached on top
of the stand, to protect the
speaker cabinet from scratches
and sliding.
Maintenance:
Mojo is available in two
distinctive painted finishes:
1. Standard finish in the revo-
lutionary new soft feel ure-
thane, developed for Mercedes
Benz dashboards and other
interior finishes in their luxury
cars. The paint is mat with a
extremely soft feel to the
touch. In contrast to normal
matt paint the soft-feel is very
strong and only requires occa-
sional dusting or wiping with a
moist cloth. Do not use any
chemicals or solvents. Do not
place any object permanently
on top of the speaker cabinet.
NEVER wax or polish soft feel.
2. Custom paint in semigloss
two-pack automotive paint
with a very hard surface. Use
same cleaning method as the
soft feel surface.