Hall Research UV2-S - Manual (Page 6)

VGA + Power Over UTP
4
2.0 Features
• Transmit video and power on one cable
• Senders with multiple outputs for splitting to multiple displays
• Handles resolutions up to 1920x1440
• Drives standard CAT5 cables to 500 feet
• Adjustable cable length compensation at each receiver
• Only one power supply required for sender and all receivers
• Rugged, Reliable, Compact size
3.0 Setup and Operation
A. Place the sender near the video source and connect it to your source using
the cable provided.
• For PC’s VGA output use a HD15 male-to-male cable (generally a short
cable may be included with your package)
• For RGB or YPbPr sources, use a HD15 to 3 RCA cable (Hall Research
Model # CHD15-3RCA-length 03 = 3ft, 06 = 6 ft).
•
B. Use an Unshielded Twisted Pair (UTP) or a Shielded Twisted pair (STP)
cable such as Cat5, 5e, or 6 wired per standard 568B to connect the sender to
the receiver(s). See Section 3.1 for important cable selection considerations.