Hall Research AD-340 - Manual (Page 7)

Universal Audio Delay Processor
5
REAR PANEL:
11. Power Connector: Connects to 6V Power Supply
12. SPDIF RCA Input: Digital Audio Input
13. Left RCA Input: Left Analog Audio Input
14. Right RCA Input: Right Analog Audio Input
15. SPDIF RCA Output: Digital Audio Output
16. Left RCA Output: Left Analog Audio Output
17. Right RCA Output: Right Analog Audio Output
2.3 Input and Output Connections
 Using RCA Coaxial cables (left/right channels usually marked
white/red), connect the analog input connectors to the audio source –
typically a CD, DVD or BD players, or a PC. A Microphone (MIC) input
with an RCA adapter can also be connected. Using an RCA Coaxial
cable (Digital usually marked orange); connect the Digital Audio to the
audio source.
 Using RCA Coaxial Cables connect the outputs to an Audio/Video
receiver or similar audio equipment. Audio Equipment with DTS
Decoder and Dolby Digital Decoder is required to decode Digital
Bitstreams encoded in the DTS Surround (5.1) and Dolby Digital
Stereo or Surround (5.1) formats.
 Plug the power supply to the unit. Use only the supply that came
with the unit.
 Install the Windows-Based Software GUI on the Host PC.
 Connect the Windows Host PC to the AD-340 with the provided USB
Cable with the Mini-B USB Connector.
Note: Sound is output simultaneously on both the Analog and Digital outputs
ONLY when the Digital Input is LPCM.