Hall Research CNT-IP-2 User Manual
Page 18
Advertising
Web Enabled Serial Controller
18
4.4.4.3 Actions
The Configuration->Actions TAB
lists all the defined actions for the
system. Actions are typically
serial and/or time delay
commands that can be assigned to
buttons or scheduled events. The
system comes with a default set of
actions and the user only needs to
add the appropriate commands to
these existing actions to begin
controlling other serial devices.
Click on the name of an Action to
edit it or click ‘Add Action’ to
create a new one.
Action Name
The action name is used to refer to the action throughout the system once it
is created. This name cannot be changed without deleting and recreating the
action.
Advertising