Getting started, Loading the battery, Inserting and removing an sd card (optional) – Hamilton Buhl HDV5200 User Manual

Page 6

Advertising
background image

5

Section 2

Getting Started

Loading the Battery

Before using the camera, users must load NP 60 Battery.

Follow the arrow direction and slide to eject the battery

1.

cover.

Insert the battery according to the correct polarity marks

2.

( + or -).

Close the battery cover firmly.

3.

Inserting and Removing an SD Card (Optional)

The camera comes with internal memory which allows you to store pictures, movies and music. You can

expand the memory capacity by using an optional SD memory card. To insert a memory card, refer to
the figure as below:

Insert the memory card into the right position.

1.

To remove an installed SD card, press the card inwards

2.

to release it.

When the card pops out, gently remove it from its slot.

3.

Note

When a memory card is fitted, movies and pictures are saved on card rather than on the built-in
memory.

Eject

Advertising