Hanna Instruments HI 84184 - Manual (Page 11)

11
Language
Options: Up to four available languages.
This option is used to change the instrument’s display language.
Press the corresponding functional key in order to select the
new option. If the new selected language cannot be loaded,
the previously selected language will be kept. The HELP
information is not available if no language file can be loaded.
Reading confirm
Options: Enable, Disable
Enable this feature to manually confirm a stable reading. If
disabled, the instrument will automatically store a reading
when it becomes stable, and move to the next step of the
measurement cycle.
Press the functional key in order to select the new option.
Beep status
Options: Enable, Disable
This option enables/disables the beep feature.
Press the functional key in order to select the new option.
When enabled, beep sounds as a short beep every time a key
is pressed or when the reading must be confirmed.
In auto confirm mode the instrument will beep until the
standard addition is detected.
A long beep alerts that the pressed key is not active.
Press / or in order to select the desired format.
Press Accept to confirm the desired date format or ESC to
return to the Setup menu without saving.
Meter information
Press Select to view the firmware version, language version,
mV factory calibration date and time and temperature factory
calibration date and time.