Hanna Instruments HI 4010 - Manual (Page 5)

5
V. V. V. V. V. Equipment required Equipment required Equipment required Equipment required Equipment required:
•
Hanna HI 5315 double junction reference electrode
with HI 7075 fill solution for measurements with
HI 4010.
•
Hanna HI 4222 pH/ISE/mV meter or other suitable
ion or pH/mV meter. (Note: log/linear graph paper is
useful if an ISE (ion) meter is not available.
•
Hanna HI 180 magnetic stirrer or equivalent with
stirring bars (HI 731320). (Note: isolate beakers from
stirrer motor heat by placing insulating material such
as foam or cork between them).
•
Hanna HI 76404 electrode holder or equivalent.
•
Plastic beakers (HI 740036P) or other suitable mea-
surement vessel.
VI. VI. VI. VI. VI. Solutions Required Solutions Required Solutions Required Solutions Required Solutions Required
Standard for Fluoride Measurements
Select appropriate Hanna Instruments standard and ISA
from the list below:
Part number
0.1 M Sodium Fluoride, 500 mL HI 4010-01
100 ppm, 500 mL HI 4010-02
1000 ppm, 500 mL HI 4010-03
10 ppm with TISAB II, 500 mL HI 4010-10
1 ppm with TISAB II, 500 mL HI 4010-11
2 ppm with TISAB II, 500 mL HI 4010-12
ISA
TISAB II, 500 mL
HI 4010-00
TISAB II, 1 gallon HI 4010-05
TISAB III , 500 mL HI 4010-06
KIT: HI 4010-30
Contains four 500 mL bottles of:
TISAB II
HI 4010-00
10 ppm with TISAB II HI 4010-10
1 ppm with TISAB II HI 4010-11
*
*
*
*
*
Standards that are asterisked contain TIASB II and are
ready to use withour further additions.
*