Hanna Instruments HI 146-00 - Manual

w w w . h a n n a i n s t . c o m
Dear Customer,
Thank you for choosing a Hanna product.
Please read carefully this manual before using the meter.
If you need additional technical information, do not hesitate
to e-mail us at [email protected].
These instruments are in compliance with the
directives.
PRELIMINARY EXAMINATION
Hanna Instruments reserves the right to modify the design, construction
and appearance of its products without advance notice.
Remove the instrument from the packing material and ex-
amine it carefully. If any damage has occurred during
shipment, immediately notify your Dealer or the nearest
Hanna Customer Service Center.
Each meter is supplied with battery and instructions
Note: Conserve all packing material until the instrument
has been observed to function correctly. Any defective
item must be returned in its original packing.
GENERAL DESCRIPTION
These instruments are specially designed to meet the needs
of simple continuous monitoring of temperature.
The housing has been completely sealed against vapors and
humidity with IP54 rating.
You can simply hang the meter right above the sample to be
tested for continuous measurement.
The probe is easy to clean and requires little maintenance.
Two models are available:
• HI 146-00 displays temperature in Centigrade degrees
• HI 146-01 displays temperature in Fahrenheit degrees.
A protected switch allows a quick check of the meter accuracy
at any time.
FUNCTIONAL DESCRIPTION
1. Molded eye
2. Probe
3. Liquid Crystal Display
Instruction Manual
&
(HI 146-00 & HI 146-01)
Thermometers