Hanna Instruments HI 93703 - Manual (Page 2)

2
Dear Customer,
Thank you for choosing a Hanna product.
Please read this instruction manual carefully
before using the instrument.
This manual will provide you with the necessary
information for the correct use of the instrument.
If you need additional technical information, do
not hesitate to e-mail us at
[email protected]
This instrument is in compliance with the
directives.
TABLE OF CONTENTS
Preliminary Examination ............................ 3
General Description .................................... 3
Principle of Operation ................................. 5
Functional Description ................................ 6
Specifications ............................................ 7
Operational Guide ...................................... 8
Measurement Procedure ....................... 8
Log-on-demand ................................... 11
Cleaning Logged Data ......................... 11
Viewing Logged Data .......................... 12
Viewing and setting Date and Time ..... 12
Error Codes ......................................... 13
Ensure Accurate Measurements ............. 14
Sources of Interference ....................... 15
Calibration ................................................ 16
Calibration Procedure .......................... 16
Viewing Calibration Date ..................... 18
Ensure Accurate Calibration ................ 18
Standard Suspension .......................... 19
Battery Replacement ............................... 20
PC Connection ......................................... 21
Accessories ............................................. 22
Warranty .................................................. 23
23
Recommendations for Users
Before using this product, make sure that it is entirely suitable for the environment
in which it is used.
Operation of this instrument in residential area could cause unacceptable
interferences to radio and TV equipments, requiring the operator to take all
necessary steps to correct interferences.
Any variation introduced by the user to the supplied equipment may degrade
the instrument's EMC performance.
To avoid electrical shock, do not use this instrument when voltages at the
measurement surface exceed 24 Vac or 60 Vdc.
To avoid damages or burns, do not perform any measurement in microwave
ovens.
WARRANTY
All Hanna Instruments meters are warranted
for two years against defects in workmanship
and materials when used for their intended
purpose and maintained according to instruc-
tions. This warranty is limited to repair or
replacement free of charge. Damages due to
accidents, misuse, tampering or lack of pre-
scribed maintenance are not covered.
If service is required, contact the dealer from
whom you purchased the instrument. If under
warranty, report the model number, date of
purchase, serial number and the nature of the
failure. First obtain a Returned Goods Authori-
zation number from the Customer Service de-
partment, then return the instrument with the
Authorization # included along with shipment
costs prepaid. If the repair is not covered by the
warranty, you will be notified of the charges.
When shipping any instrument, make sure it is
properly packaged for complete protection.
All rights are reserved. Reproduction in whole
or in part is prohibited without the written
consent of the copyright owner.