Hanna Instruments HI 88713 - Manual (Page 15)

28 29
Date / Time
This option is used to set the instrument’s date and time.
Press “Modify” to change the date/time.
Press “Left” or ”Right” functional key to highlight the
value to be modified (year, month, day, hour, minute or
second). Use the UP or DOWN key to change the value.
Press “Accept” functional key to confirm the new value
or ESC to return to the setup without saving the new
time or date .
Time format
Option: AM/PM or 24 hours.
Press the “AM/PM” functional key to select the
new value.
Date format
Press “Modify” functional key to change the Date
Format.
Use the UP or DOWN key to select the desired format.
Press “Accept” functional key to confirm the value
or ESC to return to the setup menu without saving
the new format.
Language
Option: English, Italiano or Español
Press the corresponding function key to change the
option.
If the new selected language cannot be loaded,
the previously selected language will be reloaded.
Tutorial
Option: Enabled or Disabled.
This option is used to enable/disable tutorial mode.
If enabled this option will provide the user short
guides on the screen.
Press the “Enable” functional key to select this option.
The instrument’s parameters can be changed in the Setup mode. Some parameters affect the measuring sequence
and others are general parameters that change the behaviour or appearence of the instrument.
The setup mode may be accessed from the main screen by pressing the SETUP key.
Press ESC or SETUP to return to the main screen.
A list of setup parameters will be displayed with currently
configured setting. Press HELP for aditional information.
Press the UP or DOWN key to select the parameter
and depending to the parameter type, select the
new value as follows.
Backlight
Values: 0 to 8.
Press “Modify” functional key to access the backlight value.
Use the “Right” or ”Left” functional key (alternatively,
the UP or DOWN key) to increase or decrease the
display backlight.
Press “Accept” functional key to confirm or ESC to return to
the setup menu without saving the new value.
Contrast
Values: 0 to 20.
This option is used to set the display’s contrast.
Press “Modify” functional key to change the display’s contrast.
Use the “Right” or ”Left” functional key (alternatively,
the UP or DOWN key) to increase or decrease the value.
Press “Accept“ functional key to confirm the value or ESC to
return to the setup menu without saving the new value.
Average
Option: Enabled or Disabled.
This option is used to enable/disable averaged measuring
mode. If enabled, the instrument takes 10 readings and
display the resulting average value
. The partial average is
displayed during measurement.
Press the “Enable” functional key to enable or disable this
option.
SETUP SETUP SETUP SETUP SETUP