Hanna Instruments HI 9064 - Manual (Page 7)

12 13
WARRANTY
All Hanna Instruments meters are guaranteed for two years
against defects in workmanship and materials when used for their
intended purpose and maintained according to instructions.
The probes are guaranteed for a period of six months.
This warranty is limited to repair or replacement free of charge.
Damage due to accident, misuse, tampering or lack of prescribed
maintenance are not covered.
If service is required, contact the dealer from whom you purchased the
instrument. If under warranty, report the model number, date of
purchase, serial number and the nature of the failure.
If the repair is not covered by the warranty, you will be notified of the
charges incurred. If the instrument is to be returned to Hanna
Instruments, first obtain a Returned Goods Authorization number
from the Customer Service department and then send it with shipping
costs prepaid.
When shipping any instrument, make sure it is properly packaged for
complete protection.
All rights are reserved. Reproduction in whole or in part is prohibited
without the written consent of the copyright owner.
HI 70605/2 RH probe with built-in temperature sensor, 2 m (6.6')
cable and perforated cap (for HI 9065)
HI 70605/5 RH probe with built-in temperature sensor, 5 m
(16.5') cable and perforated cap (for HI 9065)
HI 70607/2 RH probe with 2 m (6.6') cable and sintered cap (for
HI 9065)
HI 70607/5 RH probe with 5 m (16.5') cable and sintered cap (for
HI 9065)
HI 70608/2 RH probe with 2 m (6.6') cable (for HI 9064)
HI 70608/5 RH probe with 5 m (16.5') cable (for HI 9064)
HI 7101
Calibration chamber for probes with perforated cap,
complete with O-ring and precalibrated saturated salts
HI7111/P Spare saturation LiCl salts for low humidity calibration
(15 g, 6 pcs)
HI7121/P Spare saturation NaCl salts for high humidity calibra-
tion (33 g, 6 pcs)
HI 721317 Rugged carrying case
TEMPEARURE PROBES FOR HI 9065
HI 765A Temperature probe for air measurements
HI 765L Temperature probe for liquid measurements
HI 765PW Penetration temperature probe, white handle (also
available with different handle colour)
HI 765W Wire temperature probe, whitout handle, for hard-to-
reach places
ACCESSORIES
Hanna Instruments reserves the right to modify the design, construction and
appearance of its products without advance notice.