Hanna Instruments HI 98300 - Manual

DiST ®
HI 98300 / 301 / 302
HI 98303 / 304
EC and TDS Testers
with ATC
SPECIFICATIONS
Range / Resolution
DiST
® 1 (HI98300/301) 1999 ppm / 1ppm
DiST ® 2 (HI98302) 10.00 ppt / 0.01ppt
DiST ® 3 (HI98303) 1999 µS/cm / 1µS/cm
DiST ® 4 (HI98304) 19.99 mS/cm / 0.01mS/cm
Accuracy (@20°C/68°F) ±2% f.s.
Typical EMC Deviation ± 1% f.s.
TDS Factor
HI 98300
0.65
HI 98301 / HI 98302 0.5
Calibration Solutions
HI 98300
HI 70442 (1500 ppm)
HI 98301 HI 70032 (1382 ppm)
HI 98302 HI 70038 (6.44 ppt)
HI 98303 HI 70031 (1413 µS/cm)
HI 98304 HI 70039 (5.00 mS/cm) or
HI 70030 (12.88 mS/cm)
Temperature Compensation
Automatic, 0 to 50°C (32 to 122ºF)
Environment 0 to 50°C (32 to 122°F);
RH 95% non-condensing
Battery Type 4 x 1.5V alkaline
Battery Life approx. 200 hours of use
Dimensions 175 x 41 x 23 mm
(6.9 x 1.6 x 0.9")
Weight 95 g (3.4 oz.)
ISTDISTNEW-R5 05/05
WARRANTY
These meters are guaranteed for one year against defects in
workmanship and materials when used for their intended
purpose and maintained according to instructions. Probes
are guaranteed for six months. This warranty is limited to
repair or replacement free of charge. Damages due to acci-
dent, misuse, tampering or lack of prescribed maintenance
are not covered. If service is required, contact the dealer
from whom you purchased the instrument. If under warranty,
report the model number, date of purchase, serial number
and the nature of the failure. If the repair is not covered by
the warranty, you will be notified of the charges incurred. If
the instrument is to be returned to Hanna Instruments, first
obtain a Returned Goods Authorization Number from the
Customer Service department and then send it with ship-
ment costs prepaid. When shipping any instrument, make
sure it is properly packaged for complete protection.
The DiST ® models are in compliance with the CE
directives.
w w w . h a n n a i n s t . c o m