Hase Cartago - Manual (Page 39)

39
Dimensions in cm
12. Technical Data
The Cartago, certified in compliance with DIN-EN 13240, can only be oper-
ated when the fire box is closed. Conforms with the DIBt (Deutschen Institut für
Bautechnik/German Institute for Building Technology) approval criteria for direct
vent fireplaces for solid fuels. Multiple connections to the chimney are possible,
see point 4. “Connection of Multiple Devices in Direct Vent Operation”.
VKF-No.: 25197; DIBt approval number: Z-43.12-376 / Typ FC41x und FC51x
The following data applies to the chimney characteristics in accordance with EN
13384-1 / 2
Combustion Values Wood
Nominal Thermal Output 7 kW
Efficiency 78 %
Particulate <20 mg/m³
CO content at 13% O2 500 mg/m³
Waste Gas Mass Flow Rate 7 g/s
Waste Gas Outlet Temp. 335 ˚C
Min. Supply Pressure at Nominal Thermal Output 12 Pa
Min. required combustion air volume 30 m³/h
Depending on the insulation of the building, the nominal thermal output of 7 kW
indicated on 25 bis 95 m² (subject to change)
Dimensions: Height Width Depth
Stove 132,5 cm 35,5 cm 53 cm
Fire box 65 cm 20 cm 27,5 cm
Weight 168 kg
Flue pipe diameter 15 cm
Pipe diameter of Hase ventilation system* 10 cm
* For separate air supply in low-energy houses and insufficient combustion air
supply in the room where the stove is installed.
Front view Side view
Top view
Inst. of Hase air system
below
20,5
Height for top installation: 130,5
35,5
Stove height: 132,5
53
Height for inst. of hase air system: 9
Height for rear installation: 120,5
18
10-16