Hase Lagos - Manual (Page 34)

34
5. Operating the Revolving Console
The Lagos has a maximum rotational angle of 90
degrees; you can adjust the rotational angle in
15-degree increments.
Unlock the rotary console by briefl y pressing the
button A and then turn the Lagos to the desired po-
sition. Shortly before the fi nal position is reached,
press the key A again and lock the stove into place
with a slight rotational movement.
A
fi g. 3
WARNING!
Never turn stove when lighting fi re! In the
whole rotational area range, the safe dis-
tances (radiation area) apply to distances
to fl ammable materials.
6. Heat Retaining Block (optional)
Above the combustion chamber, there are solid
storage ashlars made from Magnetite. These store
the heat of the fi re and radiate it slowly once again,
providing prolonged warmth. The storage ashlars
mean that only upward outfl ow is possible.
7 . Initial Operation
NOTE!
During shipment, condensation moisture
can accumulate in the stove’s interior,
which may possibly lead to the appear-
ance of condensation or water on the
stove or fl ue pipes. Please dry off these
damp areas immediately.
The surface of your stove was treated in a sand-
blasting machine before applying the colour coat-
ing. Despite careful and thorough inspection, there
may still be some residual material in the stove
body, which can fall out when your stove is being
installed.
NOTE!
To prevent any damage, please immedi-
ately vacuum up these small steel pellets
with a vacuum cleaner.
The fi rst time a stove is operated, the heat develop-
ment causes the emission of volatile components
from the coating, sealing strips and lubricants, and
smoke and odours can occur.
2. Vorbereitung zur Montage
2.5 Drehwinkel am Aufstellort einstellen
fi g. 4
2. Vorbereitung zur Montage
2.5 Drehwinkel am Aufstellort einstellen
fi g. 5