Hase Lisboa - Manual (Page 31)

31
5. Operating the Revolving Console
The Lisboa features a revolving console as a standard feature.
To turn the Ottawa to the desired position, pull the lever (A) to
disengage the locking mechanism.
The Lisboa has a maximum rotational angle of 360 degrees;
you can adjust the rotational angle in 15-degree increments.
Lisboa
Bedienungselemente
A
fi g. 3
If a fl oor plate is required, its size must match the rotating
range of the stove.
WARNING!
Never turn stove when lighting fi re!
In the whole rotational area range, the safe
distances (radiation area) apply to distances
to fl ammable materials.
6 . Initial Operation
NOTE!
During shipment, condensation moisture can
accumulate in the stove’s interior, which may
possibly lead to the appearance of
condensation or water on the stove or fl ue
pipes. Please dry off these damp areas imme
diately.
The surface of your stove was treated in a sandblasting ma-
chine before applying the colour coating. Despite careful and
thorough inspection, there may still be some residual material
in the stove body, which can fall out when your stove is being
installed.
NOTE!
To prevent any damage, please immediately
vacuum up these small steel pellets with a
vacuum cleaner.
The fi rst time a stove is operated, the heat development
causes the emission of volatile components from the coating,
sealing strips and lubricants, and smoke and odours can occur.
At a higher combustion temperature, this one-time process
can take between 4 to 5 hours.
To achieve this higher combustion temperature, please incre-
ase the fuel quantity recommended
in Section 8, „Adding Fuel/ Heating with Nominal Thermal
Output“, by approximately 25%.
CAUTION!
To prevent adverse effects on health, nobody
should stay in the room(s) during this process
2. Vorbereitung zur Montage
2.5 Drehwinkel am Aufstellort einstellen
fi g. 4
2. Vorbereitung zur Montage
2.5 Drehwinkel am Aufstellort einstellen
fi g. 5