Adding fuel / heating at nominal thermal output, Emptying the ash drawer, Adding fuel / heating at – Hase Valencia User Manual
Page 35: Nominal thermal output
35
7. Adding Fuel / Heating at
Nominal Thermal Output
More fuel should be added to the fi re when the
fl ames from the previous burning off phase have just
gone out.
Adding Fuel / Heating at Nominal Output
Procedure
Position of
Control Elements
Adjust secondary air.
Set air slider to position
2 (fi g. 4).
Add two logs weighing
approx. 1.9 kg in total.
Place logs with the end to
the front of fi re box. Only
add a single layer of fuel.
Open fi re box door.
Close fi re box door.
Tab. 2
fi g. 4
8. Emptying the Ash Drawer
As a safety precaution, please make sure that you
only dispose of ashes once they are cold.
The ash drawer contains the mineral components
of the wood (approx. 1%) as combustion residues.
Lift the fi re grate and tilt it towards the back (fi g. 5).
The furnace ash dump can then be removed (fi g. 6).
fi g. 5
fi g. 6