Hd can module programmer’s guide (windows) – Hatteland Display HT B22 (Fanless) User Manual
Page 25
Advertising
DOC101357-1_ - rev 2 – 2013-09-23 - Created by:6644
Page 25 of 25
Hatteland Display AS, Åmsosen, N-5578 Nedre Vats, Norway
Tel: (+47) 4814 2200 - [email protected] - www.hatteland-display.com
HD CAN Module Programmer’s Guide (Windows)
All intellectual properties belongs to Hatteland Display AS
p)
J2534_ERROR_CODE
J2534::PassThruReset( void
)
This function resets gateway.
Parameters
Returns
Status, see function return codes in
hdj2534.h
.
Advertising
This manual is related to the following products: