HITEC P-51 Mustang - Manual (Page 4)

P51D MUSTANG
The P51D Mustang is a Plug and Play (P2GO) type model that requires additional items
for operation. The items listed below are needed to fl y.
• 4-Channel Radio and Receiver
• 1000 mAh 7.4V LiPo battery and Suitable Charger
Features
• Realistic Military Paint Scheme
• Semi-Assembled Airframe Finishes in Minutes
• Pre-installed Servos, Brushless Motor and ESC
• Four Channel Control:
Throttle, Rudder, Elevator and Ailerons
Specifi cations
• Wingspan: 29.5 in.
• Weight: 15 oz.
• Length: 25.5 In.
• Motor: WBL-1200
• ESC: WBE-12A
Before assembly, it is important that you remove the parts from the packaging and check to make sure that
all the parts are included and that they are in good condition.
A. Fuselage Assembly (includes installed motor & ESC)
B. Main Wing
C. Horizontal Stabilizer
D. Vertical Stabilizer
E. Landing Gear
F. Auxiliary Oil Tank
G. Screws Package
FEATURES AND SPECIFICATIONS
ITEMS REQUIRED TO READY THIS MODEL FOR FLIGHT
PARTS LAYOUT AND LISTING
Before Assembling the P51D Mustang
Keep in mind when assembling and fl ying the P51D Mustang, that radio control model airplanes may cause
injury or property damage when improperly fl own or mishandled. Always follow the warnings written in the
instruction manual. Improper usage could lead to damage and/or failure of the electronic equipment. Be sure
to read this instruction manual in its entirety before assembling and fl ying this model.
- 4 -