HITEC X1 Touch: AC/DC, Multi-Chemistry, Touch Screen Battery Charger - Manual (Page 11)

20 21
CHARGER OPERATIONS (cont.) CHARGER OPERATIONS (cont.)
3. PROGRAM START
Touch the start button or touch and hold the framed Operation Program
for 3 seconds to start the program. The charger will check the number of
battery cells automatically. If the detected result and your setting match, the
charger will begin the selected operation. 4. PROGRAM STOP
To stop the charge or discharge process, touch STOP. The process will stop
and you will be taken back to the Main Menu
5. PROGRAM COMPLETE
When the program progress is completed, an audible sound will be heard
and the charger will display the completed process information. Information Displayed during Operation
If the settings are incorrect, an error message will be displayed. Touch the Home
button to go back to the main menu and correct the setting before proceeding.
Battery Information >
< Current Operations
Elapsed Time > < External Temperature*
Charge/Discharge > < Internal Temperature
Capacity Supplied > < Pack Voltage
Current
*when used with optional
temperature probe