Home Easy HE106 - Manual

1 6 5 4 3 2
1 2 3 4 5 6 7
HE-106 Remote Control
Door Release
V1.0
The HE-106 Remote control Door Release allows to
you unlock and allow access control to a variety of
aluminium, timber and steel doors.
Simply press the button on your HomeEasy remote
to unlock your door
Compatible with HE100, HE,101, HE300
HE301, HE303, HE307 & HE308 Remote Controls
-Suitable for right, left, inward and
outward opening doors.
-Fail Lock Operation
-30 Metre Range
HOME
easy
Set-Up Diagram:
SX37
HE-106
ON
SX37
12V DC Power
T
12V AC~300mA (Not Included)
Installation:
HE106 Door Release:
First select a suitable location for the HE-106 door release unit, it is recommended
that HE-106 is not placed in direct sources of sunlight, heat and onto metallic
surfaces, as this will the effect the operating performance.
Before fitting the door release unit, test the unit to make sure the location is suitable
e.g. operating the unit through an external wall will reduce the operating range, if
required move the unit close to the external wall. The HE-106 is an accessory product
The HE-106 is an accessory product for the HomeEasy
range of products, an additional remote control unit is
required for the HE106 door release to operate.
1: The HE-106 base plate, can be attached using either the self adhesive strip or screws.
2: Clip the HE-106 onto
the base plate using
the key-hole slots.
3: Connect the SX37 power adapter into the
terminal connections "1" and "2" as per the
diagram.
Terminal 1 + wire
Positive Negative
4: Plug the SX37 power adapter into a standard 13amp
socket, the HE-106 will beep twice and the LED will flash to
indicate that the power is connected. Now program a
HomeEasy remote control to the HE-106 unit
-See Pairing/Deleting Remote Control (Remote Control Not
Included).
5: Install the HomeEasy Door Lock into the door frame, making sure the location
and orientation is correct for the door. The HomeEasy Door lock is powered by a
12VAC -300mA transformer (not included), connect one terminal from the
transformer to one of the terminals on the door lock.
T
12V AC~300mA (Not Included)
Door Lock
Door Lock
HE-106