Range reduction guide, Off on – Home Easy HE206 User Manual

Page 2

Advertising
background image

C H Byron

34, Sherwood Rd

Aston Fields

Bromsgrove

B60 3DR

Contact Details:

433MHz

R&TTE

APPROVED

CH Byron Electrical United Kingdom. www.chbyron.com

A

B

DK

FIN

F

D

GR

LT

IRL

I

L

NL

P

E

S

UK

BG

CZ

EST

H

IS

LV

M

N

SK

SLO

CH

PL

RO

0560

Tel: 0845 2301231

Fax: 01527 557701

Web: www.chbyron.com

E-mail:

[email protected]

Contact:

Helpline: 0845 2301 231

TIMBER

CONCRETE

METAL

GLASS

PLASTICS

RF Range:

:

The radio signals operating distance is reduced when the signal has

to pass through walls. The radio signals achieve a range of 30m inside a building;
this can be reduced depending on the type of material

10 - 15%

BRICK

10 - 40%

40- 80%

10 - 40%

90%

5 - 15%

Range

Reduction Guide:

Switching On/Off /Dimming:

Help Section :

Product Specification:

Switch Converter: HE-206
Power: 230V~50Hz
Max Load:100W BEC14/E27 (Incandescent Lighting)
Internal Fuse: 2A, 130 degrees Celsius
Range: 30 Metres (Open Distance)
Frequency: 433.92MHz
Indoor Use Only

Warning: Never Exceed the Product Specification

OFF

ON

Remote Control:
(See pairing/deleting with remote control)
On: Press on button
OFF: Press Off button

1

2

Resetting Ceiling Rose:
To delete all the remote control units from the memory of the HE-206 Ceiling
Rose, hold the "Learn" button for more than 6 seconds, the LED will start to
blink continuously. Press the learn button again, the LED will blink twice to
confirm the deletion of all remote controls form the memory of the Ceiling
Rose.

Dimming: Press "On" and then press "On" again, the Ceiling Rose unit will
now start to dim, press "On" to select the required level. To switch "Off",
press off as normal.

Standard Light Switch:
On/Off:
Switch on and off as normal.
Dimming: Switch On, Off and On again. The converter will now start to dim, to
select the required level switch the light Off and On.

Pairing/Deleting With Remote Control:

Up to Six remote control units can be paired with
HE-206 Ceiling Rose.
To program a HE-206 Ceiling Rose install the unit as
per the instructions (See Installation), now press the
"Learn" button located inside the ceiling rose cover.

Deleting Remote Control:
To delete a remote control that has been paired with HE-206 Ceiling Rose, simply
press the "Learn" button. The LED will start to blink; press the "Off" button on the
remote control, the LED will blink twice to confirm that the remote control has been
removed from the memory of the Ceiling Rose.

The LED will start to flash, now press the selected "On" button on the remote
control, the LED will stop flashing. The units are now paired together. Place
your selected light bulb (max 100W) into the Bayonet Ceiling Rose
(BEC14/E27), you can test this by pressing the selected "ON/OFF" button.

OFF

ON

1

2

LED

LEARN

Advertising