Hope Tech 1 LED Adventure Headlight - Manual

INSTRUCTION MANUAL
INTRODUCTION
CONTENTS
IMPORTANT INFORMATION
WARRANTY
www.hopetech.com
Light Source: 1 x Cree LED
Light Output: 215 measured lumens
300 generated lumens
Beam: Diffused uniform beam
(+/- 12º)
Distance: 80m
Mounting: Head Harness, handlebar or helmet mount
Battery: 4 x AA cells
Charge Time: Variable, dependant on cells
Weight: 215g (complete without batteries)
Power Levels: 4, including flash
Burn Time: Variable, dependant on cells
All Hope Technology lighting systems are covered for one year from
original date of purchase against manufacturer defects in material and
workmanship. Proof of purchase is required. Product must be returned
to Hope Technology to process any warranty claim. This warranty does
not cover any damage caused through mis-use or failing to comply by
the recommendations given in this manual. This warranty does not
affect your statutory rights.
The new VISION 1 LED uses a single Cree high power LED providing up to
215 (measured) lumens of light output on max power. The versatility of
being able to accept any AA (LR6) size battery cell gives you the option of
achieving extended burn times in an extremely small package. With a
regulated drive circuit you will always get the same level of light output
regardless of what battery cell you use.
The multiple mounting options allow you to mount the light wherever
you choose to use it, whether it be as a main bar mounted light, a helmet
light or simply as a hand held flashlight.
We strongly advise you read the following recommendations in order to
prevent injury or damage to the lighting system.
WARNING
· This lighting system will withstand harsh wet weather conditions.
However, it is not designed to be submersed in water. Please ensure
that the light unit and battery pack are removed from the bike
before washing - particularly if using a high pressure jet wash.
· Do not look directly at the beam, permanent eye damage could
result. Consider other people when mounting the light on the head
to avoid dazzling them.
· Keep this light away from children.
· This light unit can get hot when in use in maximum power mode.
This is normal and should not be mistaken as a malfunction. Please
use with caution.
· Unlike unregulated LED lighting systems, this light unit will shut
down suddenly after a period of time in low battery mode without
any dimming of the light. Please bear this in mind when using at
night.
· Only use high quality disposable or rechargeable battery cells.
When replacing discharged cells it is important to replace all four
cells together. Do not mix old and new batteries or different battery
types.
· Do not short-circuit the battery terminals. This causes the
battery cells to overheat and could result in fire or explosion.
· The battery charger (where applicable) is designed for indoor use
only and should not come into contact with water.
· The battery charger (where applicable) contains dangerous
voltages and the cover should not be removed. Any attempt to
open the charger will invalidate the warranty.
· This light unit conforms to the requirements of EC directive
2004/108/EC for electromagnetic compatibility.
www.hopetech.com
HIGH POWER LED LIGHTING SYSTEM
1. 1 LED ADVENTURE lamp unit
2. 4 x AA battery case
3. Universal handlebar clamp
4. Elasticated battery case strap
5. 1.0m extension cable
6. M5 x 10mm bolt 7. Handlebar clamp O-ring
8. 25.4mm handlebar sleeves (x2)
9. 31.8mm handlebar sleeves (x2)
10. Helmet mount
11. Mount adapter
12. Head harness
1 2 4 5 3
6 7 8 9 10 11 12