Dell fi-412PR - Manual (Page 6)

2 |
Use in High-safety Applications
This product has been designed and manufactured on the
assumption that it will be used in office, personal, domestic,
regular industrial, and general-purpose applications. It has
not been designed and manufactured for use in applications
(simply called "high-safety applications" from here on)
that directly involve danger to life and health when a high
degree of safety is required, for example, in the control of
nuclear reactions at nuclear power facilities, automatic
flight control of aircraft, air traffic control, operation
control in mass-transport systems, medical equipment for
sustaining life, and missile firing control in weapons
systems, and when provisionally the safety in question is
not ensured. The user should use this product with
adopting measures for ensuring safety in such high-safety
applications. PFU LIMITED assumes no liability
whatsoever for damages arising from use of this product by
the user in high-safety applications, and for any claims or
compensation for damages by the user or a third party.
Conventions
Warning Indications Used In This Manual
WARNING
This indication alerts operators to an operation
that, if not strictly observed, may result in
severe injury or death.
CAUTION
This indication alerts operators to an
operation that, if not strictly observed, may
result in safety hazards to personnel or
damage to equipment.
Symbols Used In This Manual
This manual, in addition to the above warning indications,
uses the following symbols in its explanations.
ATTENTION
This symbol alerts operators to particularly
important information. Be sure to read this
information.
HINT
This symbol alerts operators to helpful advice
regarding a procedure.
A TRIANGLE symbol indicates that special care
and attention are required.
The drawing inside the triangle shows the specific
caution.
A CIRCLE with a diagonal line inside indicates an
action that users may not perform.
The drawing inside or under the circle shows the
specific action that is not allowed.
R
Outline characters on a colored background show
instructions users should follow.
It may also include the drawing that shows the
specific instruction.
Screen Examples in This Manual
The screen examples in this manual are subject to change
without notice in the interest of product improvement.
If the actual displayed screen differs from the screen
examples in this manual, operate by following the actual
displayed screen while referring to the User's Manual of
the scanner application you are using.
The screenshots used in this manual are for Windows,
FUJITSU TWAIN 32 Scanner Driver.
About Maintenance
The user must not perform repairs on this product.
Contact the store where you purchased the scanner or an
authorized FUJITSU Image Scanner service provider to
have repairs made on this product.