Operation – JUGS Sports Cricket Bowling Machine User Manual
Page 17
▲
!
WARNING:
A protective screen must be used to protect the operator and the
machine from batted balls.
NOTE:
We suggest that each operator spend a couple of hours experimenting with the
JUGS bowling machine. Try many different speed settings. Do not be afraid that
any setting you make will harm the bowling machine; however, you should use a
wide backstop when experimenting with faster speeds.
10. Space all deliveries approximately six seconds apart. Try to get the batter to
regard each delivery as a “separate” delivery and not to be an “automatic”
swinger.
11. Always “show” the ball to batter. When you are certain the batter has
acknowleged that he or she is ready, set the ball in the feed chute and release.
Do not drop the ball into the chute.
12. Do not permit more than one or two persons around the bowling machine
during its operation.
13. Do not permit the bowling machine to fall on its wheels. This could result in
non-warrantied damage.
14. Check the tightness of all bolts and nuts at regular intervals. If any looseness,
vibration or rattle is noticed, correct it immediately before further use.
15. Always turn the speed dial to the full counter-clockwise position when bowling
is completed or temporarily stopped. Then turn the toggle switch to the OFF
position.
15
Operation