Configuring the wireless network – Dynex DX-WGPNBC User Manual

Page 3

Advertising
background image

Configuring the wireless network

3

8 If you are using Windows 98, right-click on the Network

Neighborhood desktop icon, then click Properties. The Local
Area Connection Properties
dialog box opens.
-OR-
If you are using Windows ME and Windows 2000, right-click on
the Network Neighborhood desktop icon, click Properties,
then click Local Area Connection's properties. The Local Area
Connection Properties
dialog box opens.

9 Click on the General tab, then click Install. The Select Network

Component Type dialog box opens.

10 Click Protocol, then click Add. The Select Network Protocols dialog

box opens.

11 From the network protocols list, select NetBEUI, then click OK.

The NetBEUI protocol is installed.

12 Click OK to return to the Select Network Component Type dialog

box.

13 Repeat steps 10 through 12 to add the IPX/SPX protocol.
14 Click TCP/IP to set the IP address for your computer. Select either

Obtain an IP address automatically or Use the following IP
address
setting. If you choose to specify an IP address, then enter
the IP value, subnet mask, DNS, Domain/ Workgroup name, and
Gateway Address values.

15 Click OK to return to Local Area Connection Properties dialog box.
16 Select the File and Printer Sharing options and sharing for your

computer’s resources, then click OK.

17 Click Yes when a pop up appears asking if you want to restart your

computer. Your computer turns off and turns on again.

Uninstalling the software and hardware

To uninstall the software and hardware:

1 Click Start, All Programs or Programs, Dynex Wireless LAN

Card Utility, then click Uninstall.

2 Remove the card.
3 Restart your computer.

Configuring the wireless network

Your Wireless LAN 802.11g Enhanced card uses its own management
software. All functions are controlled by this utility. To make it easier to
move from one network environment to another, the utility uses profiles
that you create.

To use the wireless utility:

1 Click Start, All Programs or Programs, Dynex DX-WNB2G

Wireless LAN Card Utility, then Dynex DX-WNB2G Wireless
LAN Card Utility
.

DX-WGPNBC_WGPDTC_Combo.fm Page 3 Thursday, June 22, 2006 12:31 AM

Advertising
This manual is related to the following products: