Konig Electronic WLAN router 300 Mbps - Manual (Page 5)

5
LED INDICATORS
LED status Description
Status Green flash Device status is working
Green RJ45 cable is plugged in
WAN LED
Green flash Data access
Green RJ45 cable is plugged in
LAN LED
Green flash Data access
Green WLAN is on
Green flash Data access
Green fast flash Device is in WPS PBC mode
WiFi LED
Dark green Wi-Fi Radio is disabled
BUTTON DEFINITION
Description
CMP-WNROUT55
When Wireless is On, press this button (about 1 sec) to execute WPS function
WPS CMP-WNROUT60
1. When Wireless is off, press this button (about 1 sec) to enable “Wireless
Radio”
2. When Wireless is On, press this button (about 1 sec) to execute WPS function
Wireless On
(CMP-WNROUT55
only)
When Wireless is off, press this button (about 1 sec) to enable “Wireless Radio”
CMP-WNROUT55
1. Press this button then Power on the device
2. Press for about 3 – 4 seconds, the device will reset to default then the Status
LED flashes per sec in Normal status
Notice: If the Status LED flashes very fast, it means this button was pressed too
long and to please try again Reset
CMP-WNROUT60
Press 6 seconds to reset to default settings then release the button when the
device works simultaneously