Konig Electronic Audio receiver with Bluetooth wireless technology - Manual (Page 2)

ENGLISH
2
Product view
3.5 mm male to male
Audio R/L
Audio amplifier
Power via adapter (optional)
Power via USB port of your device
Analogue connection
1. Connect the 3.5 mm audio cable connector (incl.) to the headphone socket
of the CSBTRCVR100.
2. Connect the second audio cable connector to the input of your audio
system or amplifier. (Refer to the manual of the device).
3. Connect the USB cable to the CSBTRCVR100 and to a USB port on your
audio system to power the CSBTRCVR100. You can also use a USB power
adapter (optional).
4. The LED flashes to indicate that the unit is powered and ready to be paired
with your device(s).
Pairing the CSBTRCVR100
To pair you smartphone or tablet with a Bluetooth® enabled device, check the
device manual.
The CSBTRCVR100 has a capacity to store up to 8 devices so you only have to
enter your PIN once.
Reconnecting your device
If you move out of range or turn off the Bluetooth® feature on your device, you
can easily reconnect by opening the Bluetooth® manager and tap the “music
receiver”.