Konig Electronic Advanced audio receiver with Bluetooth wireless technology - Manual (Page 3)

ENGLISH
3
Reconnecting your device
If you move out of range or turn off the Bluetooth® feature on your device, you
can easily reconnect by opening the Bluetooth® manager and tap the “music
receiver” again.
The connection is automatically being established if the CSBTRCVR110 is
powered.
If you want to switch from one device to another, follow the steps below:
1. End the existing Bluetooth® connection.
2. The CSBTRCVR110 is now ready to be connected to another device.
3. Follow the instructions ‘Pairing the CSBTRCVR110’ to connect the new
device.
LED indication
Indication Meaning Description
Flash every 5 seconds Pairing Searching the device in pairing
mode/waiting for a connection
Constantly switched on Connected CSBTRCVR110 and device are
connected
Troubleshooting
If you do not hear any sound coming from your speakers, check the following:
- make sure the CSBTRCVR110 is powered;
- make sure the audio cable is properly connected to the CSBTRCVR110;
- make sure the audio source on your amplifier is working properly;
- make sure that the volume level is high enough;
- make sure the devices are at a maximum distance of 10 metres from the
audio transmitter;
- make sure the Bluetooth® function is activated on your device;
- make sure that there is music playing on your device.