Konig Electronic USB 2.0 to VGA/DVI adapter User Manual

Page 6

Advertising

Effects on Vista Aero interface:
On windows Vista, after you install the USB display adapter the original Vista Aero interface(if enabled)

will be disabled. You will be warned that that color scheme has been changed when finishing the adapter

installation. But if you unplug or uninstall the adapter, the system will automatically resume the Aero Glass

Look.
Disconnecting the adapter:
If the adapter is unplugged from the computer, the add-on monitor goes blank. All windows and icons move

to the primary screen.
On reconnection of the adapter, the adapter returns to the same mode as it was before disconnection.

However, windows and icons that were previously on the screen will not be moved back.
Using multiple adapters:
Up to 6 adapters can be simultaneously attached to one computer. To use 6 adapters:
• Install the driver as decrypted in the “Installation” section and connect the first adapter to your

computer.

• After plugging in the first adapter you can plug in the following adapters up to 6 adapters at maximum.
Standby and Hibernate, Shut Down and Restart:
When the adapter is connected to a computer and an external monitor, if the computer goes into standby

or hibernate mode, the external monitor display goes blank.
When the computer returns to an active state, the external monitor display keeps the same setting it had

before the computer went into standby or hibernate mode. However, if the add-on monitor was set for

extended mode, windows that were previously on the external monitor will not move back to that secondary

monitor. Also, if the add-on monitor is in extended mode and the computer requires a login after standby or

hibernate mode, the login screen appears on the primary computer monitor, not the external monitor.
If the computer is shut down, restarted and logged in, again the add-on monitor returns to the same mode

as it was before shutdown.
Uninstall the adapter and driver:
If for any reason you want to uninstall the video adapter and its driver,

please take these steps:
1) Open the Control Panel and double-click Programs and Features

on Vista or Add or Remove programs on XP/2000

2) Select USB Multi-Display and click Uninstall or Remove.
3) Click Yes to confirm the removal. During the removal process a

couple of DOS windows will pop up.

4) Click YES restart your computer and then unplug the adapter now.