Konig Electronic 7" LCD monitor with camera - Manual (Page 6)

6
For this feature to work, the microphone on the camera needs to be switched on.
Maintenance
Clean the camera with a damp cloth.
Do not use cleaning solvents or abrasives.
Troubleshooting
Carry out the following checks if the camera is not working properly:
•
Make sure that the monitor is set to the corresponding AV channel (AV1-4) as set on the camera.
• Make sure that the camera and the monitor are not damaged.
• Make sure that the power adapters are not damaged.
• Make sure, when automatic switching mode is on, that the cameras in the AV switched set are not
set to “ ο”.
• Make sure that the display settings are all set properly.
Warranty
Any changes and/or modifications to the product will void the warranty. We cannot accept any liability
for damage caused by incorrect use of this product.
Disclaimer
Designs and specifications are subject to change without notice. All logos, brands and
product names are trademarks or registered trademarks of their respective holders and
are hereby recognised as such.
Disposal
• This product is designated for separate collection at an appropriate collection point. Do
not dispose of this product with household waste.
• For more information, contact the retailer or the local authority responsible for waste
management.