Konig Electronic Video door phone system - Manual (Page 6)

6
ENGLISH
Answering unit
Install the
answering
unit to your
preferred
height.
User instructions
Operation
Operation indicator
When the system is installed and the 12 V adapter is connected to the
answering unit and a wall socket, the red operation indicator will light up.
Doorbell
When a visitor presses the doorbell, the answer unit will play the doorbell
tune and the monitor will turn on automatically. The monitor stays on for
about 20 seconds and then shuts down automatically.
Monitor button
Switches the monitor on for a quick environment check. The monitor will
show the recording of the camera.
Alarm button
In case of an emergency, push the alarm button. The alarm sound will be
given by the doorbell loudspeaker.
Unlock button
Press the unlock button to unlock the door for the visitor. (only when an
electronic lock is installed)
Volume switch
Set the switch to the desired volume.
Menu setting
Press the monitor button to switch on the monitor in order toadjust the brightness, contrast,
hue (colour) and sharpness.