Konig Electronic High-definition DVB-T2 receiver - Manual (Page 13)

ENGLISH
13
2.4 Video Output
Select between CVBS and RGB.
3. Channel search
This menu consists of 4 major sub-menus as
follows:
-
Auto Search
- Manual Search
- Country
- Antenna Power
3.1 Auto search
Press OK on Auto Search to search channels.
For the first searching, all searched TV channels
and radio channels will be displayed on the list
in order. Through one colour bar at the bottom
of the search window, users can know the
searching progress of the current channel. The
TV and Radio Channels you searched will be
shown in the list, you can know the number of
programmes at the top of the window. During
the search, you can press EXIT to cancel. After
searching, press EXIT to return to the normal
mode.
3.2 Manual search
Frequency channel: Press to select the
channel.
Frequency: Press the number key to input.
Bandwidth: Press to select between 6,
7 and 8M.
Through two colour bars at the bottom of the
search window, users can see the signal quality
and strength of the current channel.
After setting, press OK to enter the searching
window.