Krix Seismix Cube - Manual (Page 2)

2
Congratulations on choosing Krix
The Seismix Cube active subwoofers will complement existing Stereo or Home
Theatre systems producing an increase in low frequency performance for a deep experience.
The Seismix Cube is compatible with a variety of small to large sized, sealed
or vented, main/satellite speakers.
Your subwoofer is powered by an effi cient class-D amplifi er capable of delivering maximum output
with low distortion for sustained periods of listening enjoyment. The amplifi er module incorporates
a switch mode power supply (SMPS) for effi cient operation with less heat generation and consistent
performance regardless of mains voltage variations.
setup in brief
The following setup procedure will help you achieve the best
performance from your subwoofer:
1. controls and features
Familiarise yourself with the controls and features of your
subwoofer.
2. positioning
Determine a suitable location for your subwoofer unit.
3. connection and calibration
Connect your subwoofer to your system, adjust the settings on
your subwoofer to integrate its sound with your speakers and
room.
Listen to a variety of music/movies to assess the sound and
settings of your subwoofer.
4. listen and enjoy
Listen to your favourite music/movies and enjoy.
disclaimer
Please read the important safetly instructions on the back of this manual before you plug in your equipment.
Disclaimer
To the extent permissible by law:
1. All warranties, conditions, representations, promises and statements relating howsoever to this product whether express or implied and
whether in contract or tort are excluded to the extent permitted by law; and
2. Our liability to you under a condition or warranty (if any) implied into this sale and purchase agreement relating to this subwoofer by the
Trade Practices Act 1974 (as amended) or any other law (whether a law of Australia or any other country) other than a condition implied by
Section 69 of the said Act is limited at our option to:
- the replacement of the product; or
- the supply of an equivalent product; or
- the repair of the product.
If you do not accept the above conditions, return this product (in the original packaging) with proof of purchase for a full refund.
!